We built a cold molded Victoria. We included a storage locker, flotation and a drain plug as well as an adjustable position for the center thwart in case there were two rowers.
Lloyds approved BS 1088 Marine Plywood, AWLGRIP finish with teak trim.
The beginning 
Mold stations 
setting up on the strongback 
making the mold 
making the mold 
starting to plank 
Finished planking 
Prep for glassing 
ready to glass 
fairing 
primer 
ready to take off mold 
off mold 
first view of interior 
floors and bulkheads 
view of floors 
flotation 
fairing 
primer 
interior paint 
starting teak trim 
exterior painting 
more teak trim 
in-wall 